Day 5

Day 5

February 5th, 2013

Today I focused on the oscillator of the Korg Ms2000. There is an substantial amount of different waveforms, and with endless combinations, you can make a broad spectrum of sounds.

Now after you choose your waveform, you can do some further sound designing by tweaking it's parameters that affect the waveform of the oscillator 1.

Control 1 is for "modifying" the waveform and it's parameters that are specific to each waveform.

Control 2 is for using an LFO to add some form of modulation to adjust the waveform specified by Control 1.

                   

- Korg Ms2000 Manual


Basically after choosing the waveform and tweaking it's first parameter, turning Control 2 is controlling an LFO that is going use a form of modulation to effect the waveform produced by Control 1.

Synth Notes:

• I stuck with a simple Saw waveform for both oscillators.
• Detuned the second oscillator
• Changed LFO 1's waveform to Sample & Hold.
• Had LFO 1 control the cutoff rate through the virtual patch.

Feel free to Comment!!

-BearCaveSynth